| PART |
Description |
Maker |
| TC1029EUA TC1029 TC1029EOA TC1029EPA |
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from ...
The TC1029 is a dual, CMOS operational amplifier designed for low-power applications. It is designed specifically for operation from a single supply, however, operation from dual supplies is also possible, and the power supply current drai
Linear Building Block - Dual Low Power Op Amp
|
MICROCHIP[Microchip Technology]
|
| RE030 |
1.75V to 2.1V. rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated with other analog cells
RE030 is a dual mode Low Drop Out (LDO) voltage regulator macrocell with programmable output voltage ranging from 1.75V to 2.1V, rated for loads up to 180 mA in full power mode and 5 mA in low power mode. It is designed to be integrated wi
|
Atmel
|
| 2N4250A 2N4250 2N4248 2N4249 |
Silicon PNP Transistors designed for low level - low nosie amplifier applications 60 V, PNP, Si, SMALL SIGNAL TRANSISTOR, TO-106
|
Central Semiconductor, Corp.
Central Semiconductor Corp.
CENTRAL[Central Semiconductor Corp]
|
| G425SD |
The G425SD is designed for low power rectification
|
E-Tech Electronics LTD
|
| MC13191 |
The MC13191 is a short range, low power, 2.4 GHz band transceiver designed for low-cost,
simple point-to-point and star network applications.
|
FREESCALE
|
| BU7150NUV-E2 |
Headphone Amplifier Designed for 0.93V Low Voltage Operation
|
ROHM
|
| GD420SD |
The GD420SD is designed for low power rectification.
The GD420SD is designed for low power rectification.
|
E-Tech Electronics LTD
|
| IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
| SLVU2-8-4 |
The SLVU2.8-4 was designed to protect low voltage CMOS devices from ESD and lightning induced transients
|
Littelfuse
|
| MPU200-4530 MDU200 MDU200-1012G MDU200-1024G MDU20 |
Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints
|
POWER-ONE[Power-One]
|
| Q6012LTH1LEDTP |
Q6012LTH1LED series is designed to meet low load current characteristics typical in LED lighting applications.
|
Littelfuse
|
| 0618001.XP 0618.125XP 0618.315XP 0618.160XP 0618.2 |
0618XP - Series 5x20mm Time-Lag Fuse Designed to IEC Standard (Low Breaking Capacity)
|
Littelfuse
|
